Thermal Sensitive Liquid Color Changing 2g

Thermal Sensitive Liquid Color Changing 2g
Thermal Sensitive Liquid, color changes according to body temperature and chemistry.
It has a beautiful reaction to the temperature.
Allow you to create beautiful nail designs in short time.
Thermal Sensitive Liquid does not need cure in UV/Led lamp.
Can be applied evenly on the entire nail bed or used to the draw patterns as desired.
Let it air dry for about 2 - 5 minutes after application depending on the amount of liquid you apply
The more liquid you apply, the more obvious the thermal color-changing effect is.
Need to apply black base color to achieve the thermal color-changing effect.
The color changes at high temperatures between 60F-90F and no color-changing effect will occur at low temperatures.
The color is blue at high temperatures and begins to change when the temperature drops. The whole color-changing process takes about 90s

Instructions How to Use:
Method A:
1. File and clean nail surface.
2. Apply base coat, cure it.
3. Apply a layer of black or dark color gel, cure it.
4. Apply an even layer of Thermochromic Liquid, and wait for it dry for 2-5 minutes.
5. Apply top coat, cure it.
6. Pick one nail plate; stamp the image on your nail
7. Apply top coat, cure it.

Method B:
1. File and clean nail surface.
2. Apply base coat, cure it.
3. Apply a layer of black or dark color gel, cure it.
4. Use Thermochromic Liquid to draw pattern, and wait for it dry for 2-5 minutes.
5. Apply top coat, cure it.

Method C:
1. File and clean nail surface.
2. Apply base coat. Cure under nail lamp for 60-90 seconds.
3. Apply a thin layer of black or other dark color gel.
4. Repeat step 3.
5. Apply an even layer of Thermochromic Liquid. Let it air dry for 2-5 minutes.
6. Apply top coat. Cure for 90 seconds.

Method D:
1. File and clean nail surface.
2. Apply base coat. Cure under nail lamp for 60-90 seconds.
3. Apply a thin layer of black or other dark color gel.
4. Repeat step 3.
5. Use Thermochromic liquid to draw patterns directly.. Let it air dry for 2-5 minutes.
6. Apply top coat. Cure for 90 seconds.

Method E:
1. File and clean nail surface.
2. Apply base coat. Cure under nail lamp for 60-90 seconds.
3. Apply a thin layer of black or other dark color gel.
4. Repeat step 3.
5. Apply an even layer of Thermochromic Liquid. Let it air dry for 2-5 minutes.
6. Transfer or draw patterns on the nails. Cure for 90 seconds
7. Apply top coat. Cure for 90 seconds.